You are here: Start » FIL.NET » FIS.FitSegmentToEdges3D_Direct Method

FIS.FitSegmentToEdges3D_Direct Method

Namespace:FilNet
Assembly:FIL.NET.dll

Syntax

public static void FitSegmentToEdges3D_Direct
(
	FilNet.Surface inSurface,
	FilNet.SegmentFittingField inFittingField,
	FilNet.CoordinateSystem2D? inFittingFieldAlignment,
	int inScanCount,
	float? inSamplingStep,
	int inScanWidth,
	FilNet.InterpolationMethod inSurfaceInterpolation,
	FilNet.EdgeScanParams3D inEdgeScanParams,
	FilNet.Selection inEdgeSelection,
	FilNet.LocalBlindness? inLocalBlindness,
	int? inMaxProfileGapWidth,
	float inMaxIncompleteness,
	FilNet.MEstimator? inOutlierSuppression,
	INullable<FilNet.Segment3D> outSegment,
	NullableRef<List<FilNet.SurfaceEdge1D?>> outEdges,
	NullableRef<NullableRef<FilNet.Profile>> outDeviationProfile,
	NullableValue<FilNet.SegmentFittingField> outAlignedFittingField,
	NullableRef<List<FilNet.Point3D>> outInliers,
	NullableRef<SafeList<FilNet.Profile>> outHeightProfiles,
	NullableRef<SafeList<FilNet.Profile>> outResponseProfiles,
	IList<FilNet.Segment2D> diagScanSegments,
	IList<FilNet.Rectangle2D> diagSamplingAreas
)

Parameters

Name Type Range Default Description
inSurfaceFilNet.SurfaceSurface to fit segment to
inFittingFieldFilNet.SegmentFittingFieldSegment fitting field
inFittingFieldAlignmentFilNet.CoordinateSystem2D?Adjusts the fitting field to the position of the inspected object
inScanCountint<3, INF>10The number of points that will be searched to estimate the position of the segment
inSamplingStepfloat?<0.0f, INF>Desired distance between consecutive sampling points on the scan segments; if Nil, the bigger of surface X and Y scales is chosen
inScanWidthint<1, INF>5The width of each scan field (in pixels)
inSurfaceInterpolationFilNet.InterpolationMethodBilinearInterpolation method used for extraction of surface points
inEdgeScanParamsFilNet.EdgeScanParams3DEdgeScanParams3D ( ProfileInterpolation: Quadratic4 SmoothingStdDev: 1.0f MinMagnitude: 5.0f EdgeTransition: LowToHigh )Parameters controlling the edge extraction process
inEdgeSelectionFilNet.SelectionSelection mode of edges
inLocalBlindnessFilNet.LocalBlindness?Defines conditions in which weaker edges can be detected in the vicinity of stronger edges
inMaxProfileGapWidthint?<0, INF>1Maximal number of consecutive not existing profile points
inMaxIncompletenessfloat<0.0f, 0.999f>0.1fMaximal fraction of edge points not found
inOutlierSuppressionFilNet.MEstimator?Selects a method for ignoring incorrectly detected points
outSegmentFilNet.INullable<FilNet.Segment3D>Fitted segment or nothing if the fitting fails
outEdgesFilNet.NullableRef<System.Collections.Generic.List<FilNet.SurfaceEdge1D?>>Found edges
outDeviationProfileFilNet.NullableRef<FilNet.NullableRef<FilNet.Profile>>Profile of distances between the actual segment points and the corresponding reference segment points
outAlignedFittingFieldFilNet.NullableValue<FilNet.SegmentFittingField>Fitting field used; in the image coordinate system
outInliersFilNet.NullableRef<System.Collections.Generic.List<FilNet.Point3D>>Points matching the fitting segment
outHeightProfilesFilNet.NullableRef<FilNet.SafeList<FilNet.Profile>>Extracted surface height profiles
outResponseProfilesFilNet.NullableRef<FilNet.SafeList<FilNet.Profile>>Profiles of the edge (derivative) operator response
diagScanSegmentsSystem.Collections.Generic.IList<FilNet.Segment2D>Segments along which the scans were run
diagSamplingAreasSystem.Collections.Generic.IList<FilNet.Rectangle2D>Areas from which the input image is sampled

Function Overrides

See also