Back to FabImage Studio website

You are here: Start » Filter Reference » System » Modbus TCP » ModbusTCP_WriteSingleRegister

ModbusTCP_WriteSingleRegister

Module:	FoundationLite

Function Code 06. Writes a single holding register in a remote device

	Name	Type	Range	Description
	inSocket	SocketId		Connected socket ID on port 502.
	inTimeout	Integer *	10 -	Timeout in milliseconds, block if not specified.
	inUnitID	Integer	0 - 255	Default is 1.
	inRegisterAddress	Integer	0 - 65535	The address of the holding register to be written.
	inValue	Integer	0 - 65535	Value to send.

Remarks

User manual

For more informations about using this filters please follow the link: Communication with Modbus TCP devices.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, FabImage Studio Professional version.

Filter Group

This filter is member of ModbusTCP_Write filter group.

See Also

ModbusTCP_ReadMultipleRegisters_AsByteBuffer – Function Code 03. Reads the contents of a contiguous block of holding registers in a remote device

ModbusTCP_ReadMultipleIntegerRegisters – Function Code 03. Reads the contents of a contiguous block of holding registers in a remote device

ModbusTCP_ReadMultipleRealRegisters – Function Code 03. Reads the contents of a contiguous block of holding registers in a remote device

ModbusTCP_WriteMultipleRegisters_AsByteBuffer – Function Code 16. Writes a block of contiguous registers (1 to 123 registers) in a remote device

ModbusTCP_WriteMultipleIntegerRegisters – Function Code 16. Writes a block of contiguous registers (1 to 123 registers) in a remote device

ModbusTCP_WriteMultipleRealRegisters – Function Code 16. Writes a block of contiguous registers (1 to 123 registers) in a remote device