You are here: Start » Filter Reference » Hardware Support » Z4Sight » Z4Sight_GetCounterReferenceValue

Z4Sight_GetCounterReferenceValue

Module:	ThirdParty

Gets the I/O command list's internal counter value at the current moment.

Name	Type	Range	Description
inDeviceID	Z4SightSystemAndDeviceIdentifier *		Device identification.
inCommandList	Integer	1 - 2	I/O command list.
outReferenceValue	Long		Command list's internal counter value.

Remarks

I/O device driver software

This filter is intended to cooperate with Zebra 4Sight devices, Zebra Indio I/O Cards and Zebra Concord Frame Grabbers using their vendor SDK. To be able to connect to the device, it is required to install Zebra AIL X SDK (Lite or Full version). Zebra 4Sight industrial PCs usually come with a preinstalled runtime license.

Add DLL path to system environment variable may be required.

Recommended Zebra AIL X SDK version for FabImage Studio usage is V22H1 (10.60.0776).

Device identification

Device field can be used to specify the number (rank) of the target board of the specified system type. Device can be set to:

DEFAULT - Specifies the default board. The default board is set in the MILConfig utility.
DEVn - Specifies the device number (rank) of the board (where 0 <= n <=15).

System field can be used to specify the system type. System can be set to:

HOST - Specifies the default build-in system like IO in industrial PC.
CONCORD - Specifies the IO system from Concord framegrabber.
INDIO - Specifies the IO system from Concord IO Card.

Note: It is strongly recommended to set the appropriate System parameter to avoid communication issues.

This filter allows to obtain the current value of an I/O command list's counter. This value can later be used to register events at precise moments of time in relation to that value.

Complexity Level

This filter is available on Advanced Complexity Level.

Disabled in Lite Edition