Back to FabImage Studio website

You are here: Start » Filter Reference » Camera Support » Dahua » Dahua_GrabImage_WithTimeout

Dahua_GrabImage_WithTimeout


Module: ThirdParty

Captures a frame using Dahua.

Name Type Range Description
Input value inDeviceID String* Device identifying number
Input value inTimeout Integer 1 - Maximum time to wait for frame in milliseconds
Input value inInputQueueSize Integer 1 - 200 Capacity of output frames queue
Input value inFrameRate Real* Requested camera frame rate in frames per second
Input value inExposureTime Real* Camera frame exposition time
Input value inGain Real* Analog gain of source image in device raw unit
Input value inBlackLevel Integer* Black level of source image
Input value inTriggerEnabled Bool* Configure trigger enable
Input value inTriggerSource DahuaTriggerSource* Source of acquisition trigger
Input value inTriggerActivation DahuaTriggerActivation* Circumstances defining when the trigger is activated
Output value outImage Image? Captured frame
Output value outFrameID Long? Captured frame ID
Output value outTimestamp Long? Captured frame timestamp

Remarks

Camera driver software

This filter is intended to cooperate with a camera using its vendor SDK. To be able to connect to a camera, it is required to install MVViewer software with camera dedicated drivers.

MVViewer can be downloaded from the following website: https://www.dahuasecurity.com/ (registration may be required).

Add DLL path to system environment variable may be required.

Recommended MVViewer version for FabImage Studio usage is 2.1.6.

Camera identification

When there is only one camera connected to a computer, field inDeviceID can be set to Auto. In this case, first available camera will be found and connected.

inDeviceID field can be used to pick one of multiple cameras connected to computer. DeviceID can be set to:

  • Serial number - should be specified on device casing in format "vendor:serial number".
Camera parameters

Setting inInputQueueSize parameter to 'Auto' will select four value as input queue size.

All the other parameters exposed by camera filters are optional, setting them to 'Auto' leaves related parameter unchanged in camera (device default or user set configuration).

To change other, more advanced camera parameters, use specific filters.

Parallel execution

This filter cannot be placed in multiple Workers.

Complexity Level

This filter is available on Advanced Complexity Level.

Filter Group

This filter is member of Dahua_GrabImage filter group.

See Also