Back to FabImage Studio website

You are here: Start » Filter Reference » System » Modbus TCP » ModbusTCP_ForceMultipleCoils

ModbusTCP_ForceMultipleCoils

Basic

Module: FoundationLite

Function Code 15. Forces each coil in a sequence of coils to either ON or OFF in a remote device

Name Type Range Description
Input value inSocket SocketId Connected socket ID on port 502.
Input value inTimeout Integer* 10 - Timeout in milliseconds, block if not specified.
Input value inUnitID Integer 0 - 255 Default is 1.
Input value inStartingAddress Integer 0 - 65535 The address of the first coil.
Input value inStatuses BoolArray

Remarks

User manual

For more informations about using this filters please follow the link: Communication with Modbus TCP devices.

Errors

This filter can throw an exception to report error. Read how to deal with errors in Error Handling.

List of possible exceptions:

Error type Description
DomainError Size of statuses array should be between 1 and 1968.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, FabImage Studio Professional version.

Filter Group

This filter is member of ModbusTCP_Write filter group.

See Also

  • ModbusTCP_ReadCoils – Function Code 01. Reads contiguous status of coils in a remote device
  • ModbusTCP_WriteCoil – Function Code 05. Writes a single output to either ON or OFF in a remote device