You are here: Start » Function Reference » Hardware Support » National Instruments » DAQmx_ConfigDigitEdgeTrigger

DAQmx_ConfigDigitEdgeTrigger

Header:	ThirdPartySdk.h
Namespace:	fil
Module:	ThirdParty

Configures a trigger in a specified task.

Syntax

void fil::DAQmx_ConfigDigitEdgeTrigger
(
	DAQmx_ConfigDigitEdgeTriggerState& ioState,
	ftl::Optional<const ftl::String&> inDeviceID,
	fil::DAQmxTaskID inTaskID,
	const ftl::String& inTriggerSource,
	fil::DAQmxActiveEdge::Type inTriggerEdge,
	ftl::Conditional<fil::DAQmxTaskID>& outTaskID
)

Parameters

Name	Type	Default	Description
ioState	DAQmx_ConfigDigitEdgeTriggerState&		Object used to maintain state of the function.
inDeviceID	Optional<const String&>	NIL	Device alias, product name or a serial number
inTaskID	DAQmxTaskID		ID of task where triggering is used
inTriggerSource	const String&		Source of trigger
inTriggerEdge	DAQmxActiveEdge::Type		Edge of trigger
outTaskID	Conditional<DAQmxTaskID>&		ID of a created task

Remarks

Device driver software

This filter is intended to cooperate with digital I/O cards using its vendor driver software. To be able to connect to a card it is required to install NI-DAQmx driver software. Currently FabImage Studio requires NI-DAQmx version 23.3.

NI-DAQmx driver software can be downloaded from the following website: https://www.ni.com/pl-pl/support/downloads/drivers/download.ni-daq-mx.html#480879.

Device identification

When there is only one device connected to computer, inDeviceID field can be set to Auto. In this situation first available device will be found and connected.

inDeviceID can be used to pick one of multiple devices connected to computer. Set this field to Device alias (for example "Dev1"), product name or serial number. This parameters should be available in Measurement & Automation Explorer.

Multithreaded environment

This function is not guaranteed to be thread-safe. When used in multithreaded environment, it has to be manually synchronized.