You are here: Start » Filter Reference » Camera Support » Ensenso » Ensenso_SetParameter_String_Deprecated

Ensenso_SetParameter_String_Deprecated

Module:	ThirdParty

Sets the value of a string parameter.

Name	Type	Description
inDeviceID	String *	Device identifying number
inPath	String	Configuration path, relative
inGlobal	Bool	true: Path is relative to global configuration root; false: relative to camera configuration
inValue	String

Examples

Configuration tree

Configuration paths are relative to root or camera tree.

for example path

Sensor/Temperature

with

inGlobal = false

will give read only access to currently opened camera sensor temperature (double)

path

Parameters/Capture/PixelClock

with

inGlobal = false

will give access to camera pixel clock

Remarks

Camera identification

When there is only one Ensenso camera connected, the field inDeviceID can be set to Auto. In this situation, the first available camera will be used.

inDeviceID can be used to pick one of multiple cameras connected to the computer. inDeviceID should be set to camera ID.

Camera driver software

This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install Ensenso SDK software, and uEye driver (same as in IDS camera filters)

Ensenso SDK can be downloaded from the following website: https://www.ensenso.com/support/sdk-download/

uEye driver can be downloaded from the following website: https://en.ids-imaging.com/download-ueye.html

Recommended Ensenso SDK version for FabImage Studio usage is 2.2 and uEye driver 4.90.

Parallel execution

This filter cannot be placed in multiple Workers.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, FabImage Studio Professional version.