You are here: Start » Filter Reference » Hardware Support » Neousys » Neousys_SetDigitalOutput_Multiple_Checked
Basic| Module: | ThirdParty |
|---|
Sets values to all digital output channels at once on a Neousys computer. Additionally, does a read-back of the values to make sure they're identical to the written values.
| Name | Type | Description | |
|---|---|---|---|
 |
inValue0 | Bool | Value to set to output channel 0 |
|
inValue1 | Bool | Value to set to output channel 1 |
|
inValue2 | Bool | Value to set to output channel 2 |
|
inValue3 | Bool | Value to set to output channel 3 |
|
inValue4 | Bool | Value to set to output channel 4 |
|
inValue5 | Bool | Value to set to output channel 5 |
|
inValue6 | Bool | Value to set to output channel 6 |
|
inValue7 | Bool | Value to set to output channel 7 |
|
inValue8 | Bool | Value to set to output channel 8 |
|
inValue9 | Bool | Value to set to output channel 9 |
|
inValue10 | Bool | Value to set to output channel 10 |
|
inValue11 | Bool | Value to set to output channel 11 |
|
inValue12 | Bool | Value to set to output channel 12 |
|
inValue13 | Bool | Value to set to output channel 13 |
|
inValue14 | Bool | Value to set to output channel 14 |
|
inValue15 | Bool | Value to set to output channel 15 |
Remarks
I/O device driver software
This filter is intended to cooperate with a device using its vendor SDK. To be able to connect to a device, it may be required to install WDT_DIO drivers and SDK.
WDT_DIO can be downloaded from the following website: https://www.neousys-tech.com/en/support-service/download-resources.
Add DLL path to system environment variable may be required.
Recommended WDT_DIO version for FabImage Studio usage is 2.3.1.
Availability
Before you use this filter make sure how many digital input and output channels does your Neousys device provide.
Compatibility
Neousys Watchdog Timer and Digital I/O support is not provided when using 32-bit FabImage on a 64-bit operating system. Please use 64-bit FabImage in such a case.
Complexity Level
This filter is available on Basic Complexity Level.
Disabled in Lite Edition
Filter Group
This filter is member of Neousys_SetDigitalOutput filter group.
See Also
- Neousys_SetDigitalOutput_Multiple – Sets values to all digital output channels at once on a Neousys computer.
- Neousys_GetDigitalInput_Multiple – Gets values of all digital input channels at once on a Neousys computer.
