You are here: Start » Filter Reference » Camera Support » Ensenso » Ensenso_SetParameter_Bool

Ensenso_SetParameter_Bool

Module:	ThirdParty

Sets a bool parameter.

Name	Type	Description
inDevices	EnsensoCameraInformation Array	Structures identifying devices
inDevice	EnsensoCameraInformation *	Specific device
inPath	String	Configuration path, relative
inValue	Bool

Examples

Configuration tree

Configuration paths are relative to root or camera tree.

for example path

Sensor/Temperature

GetGlobalParamerter

filter will give read only access to currently opened camera sensor temperature (double)

path

Parameters/Capture/PixelClock

GetParamerter

filter will give access to camera pixel clock

Remarks

Camera identification

When there is only one Ensenso camera connected, the field inDevices can be set to Auto. In this situation, the first available camera will be used.

inDevices can be used to pick one or many of multiple cameras connected to the computer.

Camera driver software

This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install Ensenso SDK software, and uEye driver (same as in IDS camera filters)

Ensenso SDK can be downloaded from the following website: https://www.ensenso.com/support/sdk-download/

uEye driver can be downloaded from the following website: https://en.ids-imaging.com/download-ueye.html

Recommended Ensenso SDK version for FabImage Studio usage is 2.2 and uEye driver 4.90.

Multithreaded environment

This function is not guaranteed to be thread-safe. When used in multithreaded environment, it has to be manually synchronized.

Complexity Level

This filter is available on Basic Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, FabImage Studio Professional version.

Filter Group

This filter is member of Ensenso_SetParameter filter group.