Back to FabImage Studio website
You are here: Start » Filter Reference » National Instruments
National Instruments
Select a filter from the list below.
Icon | Name | Description |
---|---|---|
![]() | DAQmx_ConfigAnalogEdgeTrigger | Returns values from a digital channel. |
![]() | DAQmx_ConfigDigitEdgeTrigger | Configures a trigger in a specified task. |
![]() | DAQmx_ConfigureTiming | Configure timing in specified task. |
![]() | DAQmx_CreateAnalogChannel | Creates a task and channel to measure or generate analog values. |
![]() | DAQmx_CreateCountEdgesChannel | Creates a task and channel to count number of edges. |
![]() | DAQmx_CreateDigitalPort | Creates a task and channel to measure or generate digital values. |
![]() | DAQmx_CreatePulseChannelFreq | Creates a task and channel to generate pulse. |
![]() | DAQmx_GetDigitalChannel | Returns array of values from a digital channels. |
![]() | DAQmx_ReadAnalogArray | Reads multiple samples from a specified analog task. |
![]() | DAQmx_ReadAnalogScalar | Reads a sample from a specified analog task. |
![]() | DAQmx_ReadCounterArray | Reads multiple samples from a specified counter task. |
![]() | DAQmx_ReadCounterScalar | Reads a sample from a specified counter task. |
![]() | DAQmx_ReadDigitalArray | Reads multiple samples from a specified digital task. |
![]() | DAQmx_ReadDigitalScalar | Reads a sample from a specified digital task. |
![]() | DAQmx_ResetDevice | Resets a selected device |
![]() | DAQmx_SetDigitalChannel | Sets array of values to a digital channels. |
![]() | DAQmx_StartTask | Starts a specified task. |
![]() | DAQmx_StopTask | Stops and clears a task. |
![]() | DAQmx_WriteAnalogArray | Writes multiple samples to a specified analog task. |
![]() | DAQmx_WriteAnalogScalar | Sets an analog input to a specified value. |
![]() | DAQmx_WriteDigitalArray | Writes multiple samples to a specified digital task. |
![]() | DAQmx_WriteDigitalScalar | Sets a digital input to a specified value. |