You are here: Start » Filter Reference » Ensenso » Ensenso_LoadSettings
Ensenso_LoadSettings
Load parameters data from a file
| Name | Type | Description | |
|---|---|---|---|
 |
inDeviceID | String* | Device identifying string |
|
inSettingsFile | File | JSON encoded parameters for camera |
Description
Remarks
Settings
To obtain settings from the camera:
- From NxView Parameters window
- Launch NxView
- Open camera
- Open Parameters window (menu Capture->Parameters...)
- Adjust settings as wanted
- Use Save... button
- From NxTreeEdit application
- Either:
- Launch FabImage Studio, add Ensenso_GrabPoint3DGrid filter, Run it
- Launch NxView, open camera
- Launch NxTreeEdit, connect to wanted instance
- Adjust settings as wanted, either in NxView or NxTreeEdit
- right click on /Cameras/BySerialNo/WantedSerialNumber and select Copy value as JSON string
- save to a simple text file using an editor
- Either:
The settings include all camera parameters, including Link, Calibration and Parameters The saved file can be then used in inCalibrationFile and inSettingsFile arguments.
Camera driver software
This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install Ensenso SDK software, and uEye driver (same as in IDS camera filters)
Ensenso SDK can be downloaded from the following website: https://www.ensenso.com/support/sdk-download/
uEye driver can be downloaded from the following website: https://en.ids-imaging.com/download-ueye.html
Recommended Ensenso SDK version for FabImage Studio usage is 2.0 and uEye driver 4.90.
Camera identification
When there is only one Ensenso camera connected, the field inDeviceID can be set to Auto. In this situation, the first available camera will be used.
inDeviceID can be used to pick one of multiple cameras connected to the computer. inDeviceID should be set to camera ID.
Complexity Level
This filter is available on Basic Complexity Level.
